Look For Wiring Digram 96 210 WA

[Deleted]

Hi was wondering anybody might have a wiring diagram for a 1996 210 WA it has a Johnson 175 Ocean runner on it. Mostly need a diagram for the contol panel and the dash gauges. I would also like to find a source for replacement gauges.
Thanks
Tim

[T-Topless]

Your gauges are most likely:
(1) Tach: Teleflex #780695PDFB, 0-7000 RPM tachometer set up for 2/3/4/5/6 pole outboards and 4/6/8 cylinder inboards,
(1) Speedo: Telflex #65389F, 10-65 MPH pitot style speedometer,
(1) Volt Gauge: Teleflex #780027PDFB
(1) Fuel Gauge, Teleflex #780024PDFB

See OMC Column:


Buy/Trade for various 1972-2008 Johnson & Evinrude Outboard Service Manuals:
getpdfs.com/outboard.motors/johnson.evinrude/
readmanual.com/outboard.motors/johnson.evinrude/

Good luck!

[Deleted]

Hi thanks for the wiring diagram looks like what I see on the boat. Not sure about the gauges. I have a
Tach w/ the engine monitor built in
Speedo piot tube
Fuel Gauge
Volt meter

The gauges are lighted black faceed gauges. The engine monitor looks like it has a special plug on the back. I am pretty sure the electrical problem I am have is with the plug on the harness due to corrosion. I just tried contact cleaner seems little better but looks like either I will have to replace or eliminate the plug.
Rgards
Tim

[T-Topless]

Not that familair with OMC, but that's their tach/guage (similar to Yammie).

The gauges are Teleflex, Lido Black-On-White in most cases.

But your White-On-Black gauges must be on this list:
www.teleflexmarine.com/products/instrumentation/instrumentation

Possibly Amega?


Possibly Eclipse?


Possibly Premier Pro Black ?