|
Post by T-Topless on Mar 19, 2015 7:00:45 GMT -6
Vendors says:
Mounting Holes center-to-center on high sides is 2-3/4" and center-to-center on low side is 2-1/2".
Will measure mine today...
|
|
|
Post by T-Topless on Mar 19, 2015 7:58:15 GMT -6
Well those wont work.
My rear rod holders on the 180cc are 3" between the top hole and the 2 lower holes. The 2 lower-holes are 2" apart...
|
|
|
Post by AHHHH-Spray on Mar 19, 2015 11:52:48 GMT -6
Where's our "Next Wave" guy? Maybe he can find out where they sourced these things. I'll send him a pm.
|
|
|
Post by freezerfiller on Mar 31, 2015 5:44:20 GMT -6
Nice find Pat! Only your third post, and already contributing! So it looks like we are talking about different rod holders? The ones Pat shows only have 3 holes, and the ones Capt. Ross described have 4?
|
|
|
Post by gnrphil on Mar 31, 2015 11:56:11 GMT -6
I believe the others need 20 degree for the rod holders on the bay boat console.
|
|
|
Post by Juan on Mar 31, 2015 17:16:47 GMT -6
pretty cheap at $9.99/pair. Great find! notworthy $9.99 for a pair? Two? one less than 3 for $9.99? or $9.99 each? That's a great price for one! I was looking for stainless but I may have to settle for plastic since I can't find a 30 degree stainless with the right bolt pattern.
|
|
|
Post by Juan on Apr 1, 2015 17:32:33 GMT -6
Just checked and those are the right angle and hole pattern for a SV2100 bay boat! Great find Pat!! emthup To my knowledge, that's the first time anyone has found any that would fit correctly without modification. Now find some in Stainless steel or even black plastic and I'll buy you a beer!
|
|
|
Post by floundereater on Apr 8, 2015 18:56:26 GMT -6
Yes sir. Walmart had the 30degree in white. The holes didn't match perfectly, but the thing off the bottom of my old ones slid right on too. The rubber thing that has a tube which drains under the console
|
|