|
|
Post by crimsrock on May 19, 2015 16:36:32 GMT -6
I have a 2003 sv2100cc and when I bought it, it didn't have the cooler/seat that was in front of the center console. There is a round frame outline on the deck where it used to be. Does anyone know where I might find a new or used replacement. Any help would be greatly appreciated. Good fishin and roll tide!
|
|
|
|
Post by Juan on May 20, 2015 4:57:04 GMT -6
Epic First Post! ROLL TIDE!  emthup It might happen but it's going to be extremely hard to find an OEM bait tank. You're best bet would probably be having one made or buying a prefabricated livewell and either permanently mount it or mount it where it can be removed (which is what I would do if it were mine). Prefab tanks come in many sizes and configurations and it should be a pretty easy install. WELCOME ABOARD! |
|
|
|
Post by crimsrock on May 20, 2015 23:42:14 GMT -6
Thanks for the info. Any ideas where I can look for one of these 40 gallon livewells? The outline of the one that was there is raised so it makes it difficult to put a square cooler there unless I do some modifications.
Thanks
|
|
|
|
Post by Juan on May 21, 2015 5:56:13 GMT -6
Not sure what size and configuration you want but Baitwells.com, Cabela's, Overton's and I believe West Marine all carry prefab livewells.
|
|
|
|
Post by Simple Man on May 21, 2015 12:56:28 GMT -6
I take a few days off and the place gets a red tide. There goes the fishing...
Crimrock, disregard my pm. I answered before I read this post.
I can't see pictures over here on the dark continent but could you position a cooler over the top of it to cover the hole so to speak? Put corner tie downs where it can't move? Unless you live bait fish a lot then put the livewell back by all means.
|
|
|
|
Post by freezerfiller on May 21, 2015 18:46:36 GMT -6
I'm surpised this thread was moved.... Seemed like a perfect category considering the crowd....  |
|
|
|
Post by crimsrock on May 22, 2015 9:59:15 GMT -6
Thanks for all the help
|
|
emthup 
