Fuel vent (I think)

[pat]

Just re-inherited my 180cc after a 3 yr loan to my son. Not in bad shape just needs a little TLC. I noticed when I picked it up today the cover /clamshell whatever on what I remember as the fuel vent was broken off. Can anybody verify from the pics that this is indeed the fuel vent and if anyone has a closeup pic of what it looks like intact or where I may find a replacement it would be appreciated.

[pat]

i1330.photobucket.com/albums/w577/pjmdbm/fuel%20vent%201_zpstjqjlrm7.jpg

[gnrphil]

Yes that's the fuel vent, I'd replace with one like this.
www.westmarine.com/buy/attwood--flush-mount-316-stainless-fuel-vent-straight-vent--P006_187_003_530?pCode=10017846&cm_mmc=PS-_-Google-_-GSC%2520-%2520Product%2520Type-_-10017846&product_id=10017846&adpos=1o5&creative=108421551724&device=c&matchtype=&network=g&mrkgadid=3076579434&mrkgcl=481&rkg_id=h-a6fb8fa3b0b8e65bd2b8d60fa8c07a3d_t-1516764513&gclid=CjwKCAiA15vTBRAHEiwA7Snfc5T0xI9VDCeA7sW_dEZdWQm8B4NeCPL6q_jUuEMXWueWq17Jj1T73xoCRNYQAvD_BwE

[freezerfiller]

While Phils recommendation will work, I'm hesitant to put a steel part subject to the type of impacts that your last one received into a glass hull. I would go with a plastic replacement and be careful docking in the future.. www.amazon.com/Atwood-911526-1-Replacement-Cover-P-Trap/dp/B001HBX2RO/ref=sr_1_4?ie=UTF8&qid=1516767120&sr=8-4&keywords=attwood+fuel+vent

[AHHHH-Spray]

The one that freezer posted above is what I used after I busted mine last summer. Looks like the only part you really need is the cap that screws into the piece that comes through the hull. That's all I needed but I couldn't find anyone that just sells the cap. The threaded part of the cap is probably still screwed into the hole. You can stick a screwdriver or something that's big enough to jam in the hole and unscrew it.

[pat]

That is the one that is on there now. I was pleasantly surprised to find an access hatch in exactly the right place to get to it. ordering one tonight. just getting refamiliarized with the boat as I had not seen in in about 3 yrs. as I 'lent" it to my 20 something son as "his" first boat. Just getting it back in as good of shape as I can and decide weather to keep or go to a "flatter" bay boat. Moved to Melbourne Beach FL and the river/lagoon is pretty skinny and the 180cc is a bit smaller than I like to venture ooutside except on nice flat days.