|
Post by brad68 on Oct 22, 2023 12:37:11 GMT -6
I’m brand new to glass boats and I’m currently putting a fish master t top on my sv21’. My question is this…..I was drilling the holes near the rear of the cc and pulled back some gray dust and was resistant when the drill bit hit it. Not drilling very deep at all but not knowing ANYTHING about what’s under the deck has me concerned I have possibly hit something that I shouldn’t have. Can anyone offer me any insight on this issue? It’s just to the left of the rear left corner of the console.
Thanks!
Brad
|
|
|
Post by brad68 on Oct 22, 2023 14:40:39 GMT -6
Can’t find where to add a picture on here. It’s a 2001 sv21cc
|
|
|
Post by gnrphil on Oct 23, 2023 7:31:40 GMT -6
Click on "Add image to post" and follow instructions. Welcome aboard.
|
|
|
Post by freezerfiller on Nov 20, 2023 21:03:33 GMT -6
aluminum fuel tank maybe?
|
|
|
Post by yessnoo on Nov 22, 2023 23:09:48 GMT -6
pretty sure a 2001 should have a poly tank my 2002 does anyways
also the tank should be an inch or two under the glass i think. I know when you open access panel below leaning post tank is about 1.5 to 2 inch under the deck
|
|