|
|
Post by chumleydoo on Sept 5, 2011 7:49:15 GMT -6
Looking for a center console cover to fit my boat - any suggestions?  |
|
|
|
Post by rhino6 on Sept 6, 2011 5:12:53 GMT -6
Chumleydoo - I have been looking for some time at off the shelf covers. Still looking. Did price a custom cover at a local shop -$475. Will post if I find something.
|
|
|
|
Post by darkhorse on Sept 6, 2011 18:07:31 GMT -6
Found a over-sized center console cover at Bass Pro shops for about 50bucks, it works alright
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 3, 2011 23:16:04 GMT -6
I'm looking too, I bought the Bass pro shop one, but it doesn't reach the floor. it needs to be 55" tall
|
|
|
|
Post by T-Topless on Dec 4, 2011 9:31:06 GMT -6
I assume you have no T-Top? What year? I can get the SeaPro OEM factory Sunbrella " Canvas Console Cover" for you: |
|
|
|
Post by Juan on Dec 4, 2011 16:00:16 GMT -6
If you're not looking for a cover that you can trailer and just want a waterproof cover to cover it while it's not being towed, WalMart sells one that covers the 2100.. It won't cover the motor but it fits from bow to stern and you can get a motor cover for under $20... I used one on mine for a couple of years without any issues until I installed the T top... If I remember correctly the 2100 bay boat size sells for less than $60.
|
|
|
|
Post by bluefin on Dec 4, 2011 20:12:48 GMT -6
i have a console cover for just the console. i have only one, and no real idea yet how to tell what boat or console it fitS??? can any one help me to figure out what it might fit? it has a sunbrella tag and another tag that has a number hand written with a ink pen (19121 ttop) it has 5 zippers leading to holes for the t top poles. it is dark blue in color.
|
|
|
|
Post by Juan on Dec 4, 2011 20:59:01 GMT -6
bluefin, I don't have a clue what your cover was made to fit but I'm interested if it will fit my console... can you measure the distance between the t top holes, total height and width and maybe post a picture?
|
|
|
|
Post by bluefin on Dec 6, 2011 19:14:02 GMT -6
juan, i will get it out and get some measurements for you most likely this weekend! i am keeping watch over my father in law for a little while (who has to be watched 24-7) and will not be able to get to my shop for a few days.
|
|
|
|
Post by Juan on Dec 8, 2011 6:46:49 GMT -6
Thanks blufin, no hurry, knowing my luck it probably won't fit anyway but I'll keep my fingers crossed.
|
|
|
|
Post by bluefin on Dec 11, 2011 21:06:33 GMT -6
juan, this is what i got, the left side of this pic would face the transom, and the right side would face the bow! 53'' high,45''long (from left lower in pic to right lower)center of t top hole is 29''from the floor, and 11'' from left corner(left in pic) center of t top hole to the right is 37'' from the floor, and 29'' from left corner (right in pic)the width (port to starboard) is 29'',and there is a rectangular hole in the front of the cover (facing bow) that is 2''x7'' that is 16'' from the top of the console to the top of the hole. my guess is that this would fit consoles with a factory installed t top, but i am not sure the combinations it fits? it is full of wrinkles but i am sure a few days in the sun it would iron itself out! his has 5 zippers 1 from every hole to the floor, i hope this helps!
|
|
|
|
Post by Juan on Dec 18, 2011 8:34:55 GMT -6
Thanks bluefin, Sorry I took so long to answer...just saw this..
based on those dimensions, I doubt it will fit my console since it's 30" wide if I remember right and if I'm reading your measurements right, the cover is 29" but I'll do some more measuring to double check.
|
|
Drop your top and go 
