Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 3, 2011 10:47:34 GMT -6
The rod holders in the center console of my 02 SV2100 are deteoriating, dried up, and crumbly. I guess due to UV exposure and salt over time. They are the skinny bolt hole pattern, and I tried replacing them once with some cheap seachoice brand but the screw holes wouldnt line up just right. Im not sure what angle the heads are, I think 30 deg. Anybody know of a good Stainless Steel replacement rod holder that uses the same screw hole width for a decent price (~30-40$) and where I can order them? Many thanks.
|
|
|
|
Post by T-Topless on Oct 3, 2011 13:39:55 GMT -6
Try Jamestown Distributors or Whitecap.
|
|
|
|
Post by Juan on Oct 3, 2011 17:09:42 GMT -6
Saw some today....WalMart has the cheap plastic Attwood replacements in white or black for under $7. each  and the more expensive style in chrome for under $30. ea. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 9, 2012 9:07:38 GMT -6
Late follow up on this thread fellas, but to all looking for a quailty console rod holder, check out Bluewater Whitecap 30deg stainless rod holders. Google them, I found them for $16 a peice. Not the best rod holders out there but gives you all the function and the good clean stainless look for your console!
|
|
jpl
Sailor
Posts: 12 
|
Post by jpl on Jul 30, 2014 14:44:41 GMT -6
seanile,
Did those have the same skinning hole pattern? Mine are falling apart too on a SV2300. I haven't found a match yet......
|
|
|
|
Post by sandyssaltie on Mar 8, 2016 13:34:39 GMT -6
The rod od holders that we are all looking for have 2 inch on center holes on the botton. The only plastic rod holders athat I have been able to fing are 2 1/2 on center. Still looking
|
|
jpl
Sailor
Posts: 12
|
Post by jpl on Mar 8, 2016 13:45:13 GMT -6
|
|
|
|
Post by Juan on Mar 8, 2016 19:22:40 GMT -6
There's something wrong with the numbers... The link has them listed at 2 for $16.95 which is a great price if they're the Sea Pro rod holders with he correct bolt pattern. |
|
jpl
Sailor
Posts: 12
|
Post by jpl on Apr 7, 2016 7:32:13 GMT -6
Juan
I ordered them and the were the correct hole pattern for my 2000 SV2300 , not sure what to tell you other than that. I copied and pasted off of confirmation email from Great Lakes......Jim
|
|
|
|
Post by Juan on Apr 7, 2016 14:30:19 GMT -6
Thanks Jim. I just ordered two.. If they're the right ones, I'll order 4 more.
|
|
|
|
Post by Juan on Apr 12, 2016 5:50:39 GMT -6
Got two of them delivered yesterday... They are indeed the correct bolt pattern for the Sea Pro line. They are not bright white in color like the existing ones and are more of a beige or light tan color but if you plan to replace all 6 rod holders, they'll look great. I'm ordering 4 more today. Thanks jpl notworthy |
|
|
|
Post by neauxla on May 12, 2016 12:18:41 GMT -6
Do they come in chrome or stainless?
|
|
|
|
Post by Juan on May 12, 2016 17:11:05 GMT -6
Do they come in chrome or stainless? If they do, to my knowledge, no one has found the right bolt pattern. I bought 6 of the stainless holders from West Marine.. they had the wrong bolt pattern and I had to send them back.. I've looked everywhere I know to look and haven't found the correct pattern yet in the metal holders. |
|
|
|
Post by neauxla on May 18, 2016 15:51:37 GMT -6
What is the correct bolt pattern? 2"x 3"?
|
|
|
|
Post by devodud on Apr 23, 2017 21:36:11 GMT -6
|
|
|
|
Post by freezerfiller on Apr 24, 2017 18:01:13 GMT -6
Interesting. I'm still trying to understand how 90 degree rod holders work.. I can't believe the perfect replacement doesn't exist in stainless. Those look good, but I'd like to have the little crossbar at the bottom that keeps my reels from swinging into each other. Does this have that, or is it smooth bottom?
|
|
Drop your top and go 
