|
|
Post by T-Topless on Oct 22, 2011 8:52:33 GMT -6
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 22, 2011 14:00:29 GMT -6
man that thing would make cold weather fishing much more bearable, looks good, does it flap a whole lot while topped out,
I like the design of your tops but wish they had a little more headroom, I really dont want to put any holes in my deck, but I only have 1 grabrail on my console so I can see where adding anymore weight or pressure would be a problem
|
|
|
|
Post by darkhorse on Oct 22, 2011 19:31:48 GMT -6
Looks great T , nice set up.
|
|
|
|
Post by T-Topless on Oct 23, 2011 10:34:21 GMT -6
man that thing would make cold weather fishing much more bearable, looks good, does it flap a whole lot while topped out, I like the design of your tops but wish they had a little more headroom, I really dont want to put any holes in my deck, but I only have 1 grabrail on my console so I can see where adding anymore weight or pressure would be a problem The Sprayshield is very tight, and the Gull Wings don't flap when mounted tightly to your gunwales. and floor. We love them, and will probably leave the Sprayshield up year around and simply zip open the smiley when we want some air. As for clearance, the T-Topless will sit about 21" above the top of your windshield grab rail - which gives it 6'2" to 6'8" on most boats. For example: SV1900 & SV2100: GrabRail=54" = 75" = 6'3"" on edge (+4" inside as the top is raised inside) 180cc: GrabRail=57" = 78" = 6'6" 190cc: GrabRail=62-1/2" = 83-1/2" = 6'11-1/2" (can be mounted lower) 220cc: GrabRail=60" = 81" = 6'9" (can be mounted lower). We mount our rod holders on the side, so you have better clearance in the rear, and you can use these rod holders to troll "way back lines". If you only have 1 grab rail around your windshield (like the Sea Pro SV1900 and SV2100 boats), you can mount the rear legs with a pair of deck hings: or add a nice pair of small (SeaChoice) grab rails to the console to mount to: |
|
|
|
Post by davesim on Aug 23, 2022 14:42:58 GMT -6
Does anyone have any advice on installing the sea spray shield, and gull wings? The canvas company we are dealing with has no idea how to do the job.
|
|
|
|
Post by gnrphil on Aug 24, 2022 7:56:58 GMT -6
On mine there are rails on the t top for the spray shield to slide into and snaps on the t top frame. I unfortunately don't have the spray shields for it though.
I'll snap some pics tonight and post up here for you to look at.
|
|
|
|
Post by gnrphil on Aug 24, 2022 7:57:30 GMT -6
Oh and welcome aboard davesim
|
|
Drop your top and go 
