Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 3, 2012 19:06:17 GMT -6
95 with 200 Mariner. Nav Lights, Horn, Bilge Pump work fine. No power at ign switch and no gauge readings. Any ideas? Thanks
|
|
|
Post by Simple Man on Jun 4, 2012 4:39:11 GMT -6
Its gonna take some time and a test light/multi meter I am afraid. Start checking it out until you find where you lose voltage at. Good luck and let us know what you come up with.
|
|
|
Post by lafromla1 on Jun 4, 2012 7:24:23 GMT -6
As Sm said, start at the switch and work your way towards the motor. A few other guys on another forum had similar issues.
One was the battery cable, it was corroded under the plastic cover, so he never saw it until he went weeks trying to figure it out. It gave enough power to run the accessories, but not enough to power the motor.
Another guy had the 50a fuse on the motor blow out due to a short and that was the last thing he checked.
Just take your time and go through each step as you work your way back.
|
|