|
Post by seagristle on May 30, 2014 8:47:30 GMT -6
The Fulton Magnum Series Tongue jack on my '02 Wesco trailer bent over the holiday weekend. Or I should say the welded bracket bent. I have looked online and cannot find a similar jack, even at the Fulton site. They all are swing/swivel jacks. Mine was stationary. I pull a '02 SV 2100. Wondering what capacity jacks others have on theirs and how the swivel ones work for you. Thanks, Kevin
|
|
|
Post by Juan on May 30, 2014 9:58:24 GMT -6
Mine looks a lot like that one... I'm curious..How did that happen?
|
|
|
Post by seagristle on Jun 2, 2014 13:36:47 GMT -6
I use a short piece of 4" PVC pipe sometimes to get additional elevation so water will drain out the scuppers when hosing down. The trailer was on the hitch and I did not notice it was on a slight incline. When I raised it up the trailer tongue it popped off the ball and shifted to the right. the wheel was not on the ground so it twisted the bracket holding the jack.
|
|
|
Post by seagristle on Jul 7, 2014 8:50:58 GMT -6
Anybody know what a SV 2100 trailer tongue jack is rated for? They run from 600 to 2,000 pounds.
|
|
|
Post by seagristle on Jul 8, 2014 8:11:09 GMT -6
Is this the one? Looks like the ticket!
|
|
|
Post by seagristle on Jul 17, 2014 9:46:08 GMT -6
Just put the new jack on my trailer. What an improvement. Thanks for the tip!
|
|