|
|
Post by jdk001 on Nov 25, 2014 9:52:53 GMT -6
Looking for length on control cables for a 04 sv2100 with a Yamaha 150. I'm going to measure it out but it would be nice to have a number to compare.
|
|
|
|
Post by Juan on Nov 25, 2014 14:03:06 GMT -6
I have the exact same setup but I'd be hesitant to give you a number (even if I could measure it) since the majority of the cable is hidden and could be a little longer or shorter than the one you are replacing.. If I were you, I'd remove the old one, measure it's length and order one the same size...but if you want to order a replacement without pulling the old one off first this might help: How to measure control cable length |
|
|
|
Post by jdk001 on Nov 25, 2014 14:46:31 GMT -6
Thanks for the post. I would pull the old one out but In the past with other boats I have used the old one to pull the new one through. Do you have another way you like to do it or have on your SV?
Thanks
|
|
|
|
Post by jdk001 on Nov 25, 2014 16:02:20 GMT -6
Going to replace both so pulled one out for a length, 17ft as an FYI.
|
|
|
|
Post by Juan on Nov 25, 2014 18:46:14 GMT -6
Try pulling it out with a rope tied to it to use for the new one?
|
|
|
|
Post by shaun on Dec 3, 2014 20:17:55 GMT -6
I recently replaced mine on my v2300 and inside the battery box compartment on the cables it gives you a model # like CC17918. The last 2 #s are the length but be careful. Once mine where removed they where 18' 6" so I had to order a 19'
|
|
