|
|
Post by greenlips52 on Jul 23, 2016 5:30:01 GMT -6
I have a 2005 220 CC with a 2006 F250. After a couple hours of run time it develops what feels like a skip. It's minor but very noticeable. The running time is varied anywhere from idle to 3500 RPM. I have replaced the plugs.Any ideas?
Thanks
|
|
|
|
Post by Juan on Jul 23, 2016 7:14:19 GMT -6
injectors! Have them cleaned.. I think it runs about $20. - $25. each but it will make a world of difference especially if you've used ethanol fuel.
and .. Welcome to the forum.
|
|
|
|
Post by mcsd63 on Jul 23, 2016 9:31:38 GMT -6
Just had mine done about 2 weeks ago. It's like a completely different boat now. I used brucatofis in apex, nc. I sent them out on Friday. They received them Monday and called me Tuesday at around noon to let me know they were done. $25 each.
|
|
|
|
Post by greenlips52 on Jul 23, 2016 13:20:12 GMT -6
Awesome info, thanks for the help!
|
|
|
|
Post by gnrphil on Jul 23, 2016 14:39:17 GMT -6
A little of topic but could you share some performance numbers with me? Speed at WOT and fuel burn at cruise. Been wondering how a 220 performs with a 250.
Cheers
Phil
And welcome aboard.
|
|
|
|
Post by greenlips52 on Jul 24, 2016 5:14:25 GMT -6
Hi Phil, I've only had the boat for a couple of months and don't have that info yet but will be happy to share it soon I hope. Still working through some bugs to get her in shape. The wiring is a mess and I'm picking away at cleaning it up. The tach quit working so that's the current project.
Rich
|
|
|
|
Post by gnrphil on Jul 24, 2016 18:21:34 GMT -6
Thanks Rich, I look forward to seeing results. I hear ya on the wiring, mine was a birds nest too, better now but not perfect.
|
|
yolo
Ensign
Posts: 626
Location: Back to Manasquan Inlet, NJ
|
Post by yolo on Sept 6, 2016 23:33:49 GMT -6
Im sure you got this fixed by now. But after plugs then unplug each coil pack with the motor running. If you unplug a coil and the motor runs the same then that coil pack is bad. If motor runs worse then the coil is good. Plug it back in and try the next one.
|
|
|
|
Post by freezerfiller on Sept 26, 2016 15:56:44 GMT -6
Im sure you got this fixed by now. But after plugs then unplug each coil pack with the motor running. If you unplug a coil and the motor runs the same then that coil pack is bad. If motor runs worse then the coil is good. Plug it back in and try the next one. I was thinking coil pack too. If cleaning the injectors don't fix it. |
|
