|
Post by petty on Nov 17, 2016 23:36:52 GMT -6
My 2006 27' CC, had entire stringer system and bulkheads replaced few years ago, very pleased with the work and ride since.
|
|
|
Post by Juan on Nov 18, 2016 6:25:56 GMT -6
Good lookin' ride!
thwelcome31
|
|
|
Post by KWinchell on Dec 6, 2018 16:01:13 GMT -6
I have the boat. 2006 Sea Pro 270 cc. I am looking for tow things. One what is the rated occupancy of this boat? Two where is the fuel tank vent? What I thought was the fuel tank vent is actually the fresh water tank vent? There is one other vent on the starboard side mid ship. I expected that vent was for the waste tank.
|
|
fraydknot
Master Chief
Life is a collection of Memories.
Posts: 384
|
Post by fraydknot on Mar 9, 2019 18:00:03 GMT -6
IF its like my 270WA the fuel vent is plummed into the main fuel line.. If you look down the fill line there is a small hole.. The boat doesn't vent overboard.. The occupancy is because its over 26ft you go by the Coast Guard ruling I believe its like 14 people!!! Crazy
|
|
|
Post by Chris on Jan 7, 2020 17:33:51 GMT -6
Hello got what seems to be a loose deck in my 2006 270cc sea pro anyone know of this issue ?
|
|
saltycracka
Sailor
"Life is like your Grandpa's tackle box, you never know what you are going to get".
Posts: 2
Sea Pro model and year: 2007 SV1900 CC Tournament Edition
|
Post by saltycracka on Jan 7, 2020 18:22:26 GMT -6
My sled, a 2007 19' CC, owned for 10 years and spent the past few years updating her look. New to the forum and looking forward to corresponding.
|
|
|
Post by Simple Man on Jan 20, 2020 18:50:49 GMT -6
Hello got what seems to be a loose deck in my 2006 270cc sea pro anyone know of this issue ? It happens. Boat has a 10 year hull warranty so unless it was sold new several years after it was built, I imagine it's out of the warranty period. It's a big job the repair but not the end of the world, top cap has to come off.
|
|
|
Post by jollyrodgers on Jun 24, 2021 10:28:09 GMT -6
Petty,do you have any pictures of the project? I am about to tackle this project. I plan to remove the cap and take the hull to a shop and have stringers redone. Any tips and tricks would be greatly appreciated.
|
|
|
Post by gnrphil on Jun 24, 2021 11:29:14 GMT -6
Petty,do you have any pictures of the project? I am about to tackle this project. I plan to remove the cap and take the hull to a shop and have stringers redone. Any tips and tricks would be greatly appreciated. He hasn't been online since 2017 unfortunately. We'd be very interested in seeing your project if you wouldn't mind posting it. Welcome aboard.
|
|