|
|
Post by korrupt3dazn on Apr 16, 2017 22:23:44 GMT -6
Hey All,
The resistance on the binnicale is has alot of resistance. I assume the Throttle and shift cable needs to be replaced. Any Idea what Size I would need?
|
|
|
|
Post by freezerfiller on Apr 17, 2017 9:57:38 GMT -6
The model and length should be stamped on the outside of the cable. You might be able to see it with a flashlight. Has it been this way, or is it a "just started happening" thing. It is possible to adjust the tension in the binnacle. If it is your cables, it's smart to go ahead and replace them all while you are at it.
|
|
yolo
Ensign
Posts: 626
Location: Back to Manasquan Inlet, NJ
|
Post by yolo on Apr 17, 2017 13:01:46 GMT -6
Yeah try what freezer said first. Take cover off binnacle and theres a screw in there. Adjust that and see what happens.
|
|
|
|
Post by korrupt3dazn on Apr 24, 2017 12:03:35 GMT -6
Ended up replacing the cables with 17' Seastar Xtreme Cables(CCX17917). With the cables removed from boat there was alot of resistance trying to move that inner cable by hand. The new cables were smooth as butter.
|
|
|
|
Post by freezerfiller on Apr 24, 2017 17:48:08 GMT -6
Sounds like you fixed your problem! Good for another 17 years!
|
|
