Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 4, 2010 22:52:08 GMT -6
My engine is stock in the down position and the switch does not respond. Battery fully charged. The engine does not start either. The gas display is also not responding. My guess is a fuse. the fuses on the side of the engine appear ok. where else should I look. I have a sea pro 19.5. Fish and ski. split console 2005.
|
|
|
|
Post by ejstenger on Jul 5, 2010 8:44:14 GMT -6
cesar, Change the fuse and see if it helps and your problem has to do with the hydraulic pump and wiring, fuse, sounds like it could be the main fuse that is located near the battery. I say this since the motor won't start, fuel guage don't work and the pump don't work. To me that means the main fuse. If you have disconnected your battery recently you may need to look around the battery and see if you missed a wire connection, there are a couple of wires on each terminal. Good luck and I hope this helps. let us know what you found, it may help someone else. <`)>((((< ED
|
|
