duke
Sailor
Posts: 26
|
Post by duke on Feb 11, 2019 13:45:37 GMT -6
So I haven’t had this boat long and bought it with smart gauges and now the enter button won’t work so they’re basically worthless. Has anyone else had this problem? Also do you leave your key on after you’ve stopped running ( have push button start) ? I was told to do so but keep hearing a humming sound coming from the motor so I’m concerned about leaving it on like that. Any help or insight appreciated thanks drew
|
|
catchersrock
Ensign
Posts: 548
Location: Maiden NC
Sea Pro model and year: 2020 Sea Pro 228
|
Post by catchersrock on Feb 12, 2019 6:53:29 GMT -6
I have no knowledge or experience with Suzuki, but, I bet the humming sound is the fuel pump. I would not leave the key on.
|
|
|
Post by Juan on Feb 12, 2019 11:26:54 GMT -6
I have no knowledge or experience with Suzuki, but, I bet the humming sound is the fuel pump. I would not leave the key on. That's what I was thinking too. I have the dumb gauges with my Suzuki so I'm no help here.
|
|
|
Post by freezerfiller on Feb 12, 2019 12:06:04 GMT -6
Are you referring to the c10 gauge or the newer gauges? If it's the c10, try a reset by holding the up and down arrows for a few seconds while powering up..
|
|
duke
Sailor
Posts: 26
|
Post by duke on Feb 17, 2019 13:07:40 GMT -6
Yes its the c10 gauge. I'll give the reset a try, hopefully it doesn't lose all my engine data.
|
|
duke
Sailor
Posts: 26
|
Post by duke on Feb 17, 2019 13:55:39 GMT -6
Tried the reset and the buttons still aren't working. Looks like I'm gonna be looking for a replacement gauge.
|
|
|
Post by freezerfiller on Feb 17, 2019 16:46:36 GMT -6
Bummer. It was worth a try.
|
|