|
|
Post by pawpaw on Feb 8, 2020 18:48:44 GMT -6
Hi everyone, I'm a new Sea Pro owner and new to this board. I just purchased a brand new 2019 208 Sea Pro with a Suzuki 140. Right now with 1.4 hours on it. I have a question about the rear jump seats. They are very difficult to move to access the below storage. The one on the port was completely froze. I took the top off the seat off to get to the storage compartment. I notice there is adjustments for the hinge slide. Has anyone tackled adjusting these seats or fixing this concern?
|
|
fraydknot
Master Chief
Life is a collection of Memories.
Posts: 384
|
Post by fraydknot on Feb 8, 2020 20:41:59 GMT -6
Pawpaw,
Welcome to the club!!! I have to say I haven’t yours is way newer than mine..
|
|
|
|
Post by Juan on Feb 9, 2020 5:08:25 GMT -6
Welcome to the forum. I moved your question here in hopes that someone with the same model can answer it.
|
|
|
|
Post by pawpaw on Feb 9, 2020 13:07:58 GMT -6
Thank You Juan, I wasn't sure where to put the question.
I did contact Sea Pro directly and they are going to let me know if I can adjust the seat hinge or they are going to send me a new hinge/track.
|
|
|
|
Post by ffjoey44 on Jul 25, 2020 18:53:05 GMT -6
Mine got easier with use
|
|
|
|
Post by demar002 on Nov 30, 2020 17:15:45 GMT -6
I just purchased a brand new 2021. I found they are very sturdy and take more effort than I thought to pull them out to open. I suspect that it will get easier once we use them a bit more.
|
|
