|
|
Post by Master crabber on Oct 16, 2020 19:14:09 GMT -6
Hi I have a 2004 Sea Pro 180cc and my livewell/wash down pump isn't working. I turned on both the livewell and the washdown buttons but my pump isn't working. How do I replace it and is there a certain pump that I have to buy? Or do you think it could be a fuse that is blown and if so what type of fuse do I need to get so I can replace it?
Thanks!
|
|
|
|
Post by Juan on Oct 17, 2020 5:23:20 GMT -6
Check to see if you have power to the switches...if you have 12 volts there, then check the breaker under the switch to see if it's tripped. If the pump still doesn't work, then check the wiring to be sure there isn't a bad connection to the pump. If none of that restores power remove the pump (some have a cartridge that pops out of the base) and try it again. Sometimes an obstruction in the base will stop the pump. If all the above fails, replace the pump by unscrewing it from the brass shut off valve. I'd replace it with the same gph rated pump or one slightly larger.
|
|
|
|
Post by AM4444 on Sept 6, 2021 19:31:19 GMT -6
I have the 02 180cc, my switch for live well up top reads live well and down below reads washdown, my boat doesn’t actually have the washdown, is your main focus getting the live well to work? Or the washdown? For me to be able to fill my live well I have to temporarily open the ball valve in the bilge area, unsure if you’re familiar but only trying to help
|
|
|
|
Post by AM4444 on Sept 6, 2021 19:42:53 GMT -6
At least I don’t think I have a washdown 🤷🏻♂️ Now I’m curious, any 02 180cc owners around and can point me in the right direction?
|
|
|
|
Post by gnrphil on Sept 7, 2021 11:04:38 GMT -6
At least I don’t think I have a washdown 🤷🏻♂️ Now I’m curious, any 02 180cc owners around and can point me in the right direction? If you have the washdown there will more than likely be a second hose coming from the livewell pump on top of the ball valve, this would lead to the washdown pump. |
|
|
|
Post by AM4444 on Sept 11, 2021 23:19:14 GMT -6
Yeah, I don’t have that, Thanks for the response though!
|
|
|
|
Post by 67vette on Oct 20, 2022 14:18:42 GMT -6
2002 180cc. I don't have power to the switches. Where does it come from? (battery, ignition switch, outboard engine, fuse panel-somewhere)
|
|
|
|
Post by Juan on Oct 20, 2022 16:44:27 GMT -6
2002 180cc. I don't have power to the switches. Where does it come from? (battery, ignition switch, outboard engine, fuse panel-somewhere) If you don't have power to any switches, there's a fuse near the battery that's the first place to check and probably the cause. Check for power there. If you have power at some switches...., the switches are daisy chained, so there's either a bad connection or a tripped beaker on the last switch that's working . |
|
