Calmtspot
Sailor
FISH OR CUT BAIT
Posts: 45
Location: East Texas
Sea Pro model and year: SV2100CC/ 2005
|
Post by Calmtspot on Mar 30, 2021 20:20:32 GMT -6
Rigging flange kit install advice. OEM or aftermarket? Have not purchased yet. Motor adapter for engine end of flange hose? I am considering a hydraulic steering line to starboard well side as well. It just needs dressing up. Looks cluttered and will ease cleaning up. If ya got pics, my I see some? Attachments:
|
|
|
|
Post by gnrphil on Mar 30, 2021 20:44:59 GMT -6
This is my list of things to do also, interested to see what you come up with.
|
|
|
|
Post by Juan on Mar 31, 2021 5:22:22 GMT -6
I used a piece of pool vacuum hose from Lowe's. I've since removed the gray one and installed a white one to match my engine. Comes in gray, white, black or blue. Cheap and looks almost as good as a factory kit imo.  |
|
Calmtspot
Sailor
FISH OR CUT BAIT
Posts: 45
Location: East Texas
Sea Pro model and year: SV2100CC/ 2005
|
Post by Calmtspot on Mar 31, 2021 20:32:13 GMT -6
Bad ass! Looks great! Noticed you moved fuel/water separator inside hold. You mount directly to transom? Shorten or not on hydro steer lines?
|
|
|
|
Post by Juan on Apr 1, 2021 3:37:50 GMT -6
Bad ass! Looks great! Noticed you moved fuel/water separator inside hold. You mount directly to transom? Shorten or not on hydro steer lines? Yep, the separator is mounted on the transom and assess is through the battery compartment. Didn't touch hydraulic steering. |
|
Calmtspot
Sailor
FISH OR CUT BAIT
Posts: 45
Location: East Texas
Sea Pro model and year: SV2100CC/ 2005
|
Post by Calmtspot on Apr 1, 2021 12:27:55 GMT -6
Bad ass! Looks great! Noticed you moved fuel/water separator inside hold. You mount directly to transom? Shorten or not on hydro steer lines? Yep, the separator is mounted on the transom and assess is through the battery compartment. Didn't touch hydraulic steering. |
|
Calmtspot
Sailor
FISH OR CUT BAIT
Posts: 45
Location: East Texas
Sea Pro model and year: SV2100CC/ 2005
|
Post by Calmtspot on Apr 1, 2021 12:30:59 GMT -6
I noticed a 1.5' x 3' white pool hose at Lowes. That the one? Did it fit engine harness Grommet or some alteration is needed?
|
|
|
|
Post by Juan on Apr 1, 2021 13:52:34 GMT -6
It's been a while but that sounds right. I just cut it to the right length, slit it end to end with a box knife then put it on with wire ties.
|
|
