Post by Calmtspot on May 17, 2021 22:53:37 GMT -6
After a 2.5 month wait for a t-mtr.
Hard decision to make but installing the hole for a cup holder helped, some!
My mistake was about a cup to far forward.
Shorter arm length would have been fine. Some blood, sweat and choice words. Box end wrench, duct tape, push nut in tape(tight fit) and add washer using tape edges to hold. Thanks Juan for the homemade extension idea. I used a large flat tip and taped wrench to it.
Hard decision to make but installing the hole for a cup holder helped, some!
My mistake was about a cup to far forward.
Shorter arm length would have been fine. Some blood, sweat and choice words. Box end wrench, duct tape, push nut in tape(tight fit) and add washer using tape edges to hold. Thanks Juan for the homemade extension idea. I used a large flat tip and taped wrench to it.
