waverunner3
Sailor
Posts: 2
Location: clearwater, fl
Sea Pro model and year: 2020 259
|
Post by waverunner3 on Nov 4, 2021 8:59:16 GMT -6
I have a 2020 259. Looking to add a promariner tournament elite 360 quad charger to my boat. I have twin 200's so I have 4 batteries. The battery compartment is pretty full with 4 batts, 2 ACR's, 3 RBS's and associated breakers, bus bars, wiring etc. So I am thinking about locating it in the CC hold. Obviously I would need promariners 5' extension cables to reach the batt compartment.
My question. Is there a run from the CC hold back to the batts compartment that I could run 4 sets of cables to the batts. And has anyone ever done this before. Or do you have another location suggestion.
Thank you.
|
|
|
Post by gnrphil on Nov 4, 2021 9:44:34 GMT -6
I don't know to be honest but there simply must be in order to get power from the battery's to the switch panel etc, have a look behind the switch panel and see if you can trace the main power wire.
|
|
waverunner3
Sailor
Posts: 2
Location: clearwater, fl
Sea Pro model and year: 2020 259
|
Post by waverunner3 on Nov 4, 2021 10:08:48 GMT -6
Im sure there is. Just wondered if anyone has done it before and how difficult is is to pull those wires back to the batts. Thank you gnrphil.
|
|
|
Post by freezerfiller on Nov 4, 2021 15:25:38 GMT -6
There should be, and it should be easy to find by following the wires from the ignition or trim tab switches. Hopefully they left you a cord in there to fish with. I think that is a good location for it.
|
|
|
Post by gnrphil on Nov 5, 2021 10:47:14 GMT -6
Im sure there is. Just wondered if anyone has done it before and how difficult is is to pull those wires back to the batts. Thank you gnrphil. I'm going to move this to "The Next Wave " thread, new boat owners might not see it here.
|
|