|
Post by obxmidgett on Feb 26, 2022 12:26:14 GMT -6
Hello Everyone, I am new to this site and owning a Sea Pro boat. I have a 2005 190cc. The two stern seats that are in the corners need to be either replaced or repaired. The bases are easy to remove but can anyone tell me how the backs of the seats are removed, they do not snap in and have no access thru the live wells. Any help is appreciated
|
|
|
Post by Juan on Feb 26, 2022 16:53:54 GMT -6
Welcome to the forum. Someone with a 190cc will know better than I but the back cushion of my front live well seat is mounted with rails / slides on the back side of the cushion. Your seat backs may be mounted the same way.
|
|
|
Post by obxmidgett on Feb 27, 2022 3:07:59 GMT -6
I can pull the seat back out enough to see a "L" shaped bracket but the seat doesn't appear to be attached to it. It looks like there are bolts at the very bottom but I can find how to get to them to unbolt them
|
|
|
Post by queenv85 on Mar 6, 2023 23:30:39 GMT -6
I can pull the seat back out enough to see a "L" shaped bracket but the seat doesn't appear to be attached to it. It looks like there are bolts at the very bottom but I can find how to get to them to unbolt them This is how mine is….I can see the bracket but nothing seems to be attached to it. Did you ever get yours off and if so how did you do it, please? Thanks.
|
|
|
Post by chesapeake18 on Mar 23, 2023 21:25:29 GMT -6
I would need to confirm, but I think you lift the bottom of the back cushion up and there is a screw or two holding it to the back fiberglass.
|
|