|
Post by 41harbor on May 4, 2022 11:05:03 GMT -6
Anyone know what the diameter (1.25" or 1.5") of the overflow tube is in a 2002 Sea Pro 220CC. Is it threaded or just a push in with rubber fitting to seal into bottom of well?
|
|
|
Post by Juan on May 4, 2022 16:36:11 GMT -6
Not on a 220 so the height may differ but I would guess the other dimensions are the same: Mine has a threaded rubber sleeve glued to 1-1/4" PVC tube. The OD of the threaded rubber sleeve is 1-1/2" and total height is 9". If you have a section of the threaded rubber sleeve, you can do as I did and build your own overflow pipe or plug by gluing a short section of the rubber threads to a 3/4" PVC coupling and then use the right length of 3/4" PVC as the stand up tube. btw: Welcome to the forum!
|
|
|
Post by 41harbor on May 5, 2022 6:52:34 GMT -6
Thanks for info. I'll try something similar when I get down to my boat next week.
|
|