|
|
Post by 67vette on Oct 22, 2022 8:48:06 GMT -6
The switches on the instrument panel have no power. Does the 12v come from the battery directly, the ignition switch or from the Yamaha outboard (F115 4 cycle)? The motor runs, trim/tilt works...just no lights, horn, bait tank pump, etc. It is very hard to climb under the console and see. Thanks for any help.
|
|
|
|
Post by Juan on Oct 22, 2022 9:48:27 GMT -6
I answered this in your first post. Did you look for the fuse near the battery?
|
|
|
|
Post by 67vette on Oct 23, 2022 7:46:13 GMT -6
Are the switches powered by the battery directly? My thought was the power came from the Yamaha outboard.
|
|
|
|
Post by Juan on Oct 23, 2022 8:30:52 GMT -6
The power comes from the battery. There should be a fuse near the battery. The power wire runs to one switch and then the others are fed (jumpered) from that one. Daisy chained.
There's a wiring schematic posted somewhere on the forum that should help you figure it out.
|
|
