|
|
Post by grumpy1 on Nov 1, 2022 17:27:18 GMT -6
Adding a trolling motor to sea pro 239 deep V hull 2021 year. Can anyone help me with the length of the shaft you have used or recommend is 72 inches sufficient?
|
|
|
|
Post by freezerfiller on Nov 2, 2022 15:43:18 GMT -6
I have a 60 inch shaft because that was the longest they made at the time and it's ok until you get in 2' seas. 72 would be good on a 210. 78-84 would probably be better on a 239.
|
|
|
|
Post by Juan on Nov 2, 2022 16:06:48 GMT -6
Measure from the mounting location on the bow to where the waterline hits when the boat is at rest. Then add 24".
|
|
|
|
Post by grumpy1 on Nov 2, 2022 21:12:49 GMT -6
Thank you that’s the same advice I have received I just wanted to be sure what others have done. Thank you
|
|
