|
Post by dogboysdad on Jun 5, 2023 19:35:36 GMT -6
I noticed that one of my rails was slightly loose, allowing side-to-side movement.in fact, one of the four screws looks slightly different - maybe replaced. Are the rails just screwed down or bolted on the underside? Thanks in advance.
|
|
|
Post by Juan on Jun 10, 2023 11:41:54 GMT -6
Mine are screwed down. I know because a few of the screws were stripped out and would just turn , causing a little movement in the rail. I just took the screws out, put a wire tie in the hole, then retightened the screws and clipped off the excess wire tie. Fixes any loose or stripped screw.
|
|