Removing Fuel Take Wall Fitting

[gpag]

2003 Sear Pro WA

I am changing my fuel lines and want to change the fuel line running from the tank to the back of the connector on the side of the boat. I don't know what the back side of this connector looks like and there is no access hatch to get to it. I am expecting that there is also a nut on the other side and I am not going to be able to pull the fuel line out to disconnect it. Before I remove the nut on this fitting, I want to make sure that I will be able to access the other side, disconnect the fuel tank hose, connect the new one and reassemble everything.

Can anyone tell me if I'll be able to disconnect the fuel line without having to cut a hatch to access the back of the fitting?

Thanks

[tunasteak]

Did you ever get your tank to fill 106gallons or is it still stuck at ~45?

[gnrphil]

Unless you can get your arm up there through the bilge access you'll have to cut an access hole, I have access plates there on my 2007 220CC.