Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 11, 2013 16:40:46 GMT -6
Is it the throttle cable or something else.
|
|
|
|
Post by Juan on Jan 11, 2013 18:14:26 GMT -6
Could be several things causing a "sticky shift"
Possibly and more than likely the shift cable might need cleaning and lube.
Could be a crimp or sharp bend in the cable.
Some shifters have a screw that allows you to adjust the friction making it harder or easier to shift... could be the adjusting screw is too tight.
WELCOME ABOARD
|
|
|
|
Post by Simple Man on Jan 13, 2013 2:16:48 GMT -6
Juan, I want to know what you edited out!  I've never had a sticky shift but I've had a stiff one. You've got a shift cable and linkage that you must grease routinely. Throttle cable too. Or you could buy a Verado and "Go Electric". Call me Sparky!  |
|
|
|
Post by freezerfiller on May 16, 2013 5:48:03 GMT -6
Are there zerk fittings somewhere to lube the shifter cables? I looked on my omc controls and didn't see any..
|
|
|
|
Post by Simple Man on May 17, 2013 0:53:16 GMT -6
I don't think they come "stock". I have seen them on cables but I think someone added them.
|
|
