catchersrock
Ensign
Posts: 548
Location: Maiden NC
Sea Pro model and year: 2020 Sea Pro 228
|
Post by catchersrock on Jun 26, 2016 17:36:12 GMT -6
Hello all, So, I am new to this site but not really new to Sea Pro. My father has owned one for 10 years. It took me 4 boats to finally come around, but, I am finally happy. I bought my 2008 SV1900CC a few weeks ago in Texas and hauled her home to North Carolina. I have been cleaning and polishing for a solid week. I think I have got her close to presentable. Thanks,
|
|
|
Post by gnrphil on Jun 26, 2016 17:46:03 GMT -6
looking good thwelcome31
|
|
catchersrock
Ensign
Posts: 548
Location: Maiden NC
Sea Pro model and year: 2020 Sea Pro 228
|
Post by catchersrock on Jun 26, 2016 17:48:44 GMT -6
Thanks
|
|
|
Post by freezerfiller on Jun 26, 2016 19:48:50 GMT -6
Looks very good. You'll love it.
|
|
|
Post by gtightline on Jun 26, 2016 22:49:19 GMT -6
Good looking boat you have there...I have a Sea-Pro I purchased new in 1998, 18 years old, all original, still going strong..... thwelcome31
|
|
catchersrock
Ensign
Posts: 548
Location: Maiden NC
Sea Pro model and year: 2020 Sea Pro 228
|
Post by catchersrock on Jun 27, 2016 11:11:34 GMT -6
Thanks for the Welcomes.
|
|
catchersrock
Ensign
Posts: 548
Location: Maiden NC
Sea Pro model and year: 2020 Sea Pro 228
|
Post by catchersrock on Oct 18, 2016 12:39:54 GMT -6
|
|
|
Post by gtightline on Oct 19, 2016 5:12:16 GMT -6
Nice looking cat you have there...One of my favorite fresh water fish...by far, pound for pound, one of the strongest pulling, for sure, and best tasting too....Looks like you have your rig set up really nice, good job.
|
|
wintergrean
Sailor
Posts: 1
Sea Pro model and year: 2008 Sea Pro SV1900cc
|
Post by wintergrean on Aug 28, 2018 9:34:37 GMT -6
I just purchased one myself recently. The boat dealer people took it out for a test run and it ran perfectly. When I took it out it immediately started cutting out. Then, it would only idle. It was also beeping. I took it Back to the dealer they ran it and it ran perfectly again. This is the third time around. I'm not sure what to do. Have you ever had this problem? The only thing I can see is that it rained just before I took it out, both times.
|
|
catchersrock
Ensign
Posts: 548
Location: Maiden NC
Sea Pro model and year: 2020 Sea Pro 228
|
Post by catchersrock on Aug 28, 2018 9:38:06 GMT -6
I just purchased one myself recently. The boat dealer people took it out for a test run and it ran perfectly. When I took it out it immediately started cutting out. Then, it would only idle. It was also beeping. I took it Back to the dealer they ran it and it ran perfectly again. This is the third time around. I'm not sure what to do. Have you ever had this problem? The only thing I can see is that it rained just before I took it out, both times. Engine?
|
|
|
Post by Juan on Aug 28, 2018 13:38:43 GMT -6
Sounds strange.. did you ride with the boat dealer when he tested it?
|
|
bbbb
Sailor
Posts: 56
|
Post by bbbb on Aug 29, 2018 10:14:04 GMT -6
And did the boat dealer take it out on the water and test the motor under load? Or did they simply hook it up to the ears and crank it on the trailer?
|
|
|
Post by kade1196 on Jun 11, 2019 17:54:11 GMT -6
Hi guys, I have a question. I have of course a 2008 SV1900cc and need to know the dimensions/model/serial number of the rear livewell lid shock... mine was broken off on accident last summer and after we moved I can’t find the old one anywhere to get the specs off of... Thanks in advance!
|
|