OEM T Top enclosure

[tbone1]

I am looking for T Top full enclosure, other canvas and cushions for my 2001 255WA Not many manufactures have the templates. So I am hoping with sea pro manufacturing again they may have what I need ? Any help at all is appreciated. Thx

[gnrphil]

I doubt they would have anything to help you but someone there might be able point you to whomever used to make the enclosures for them, or your best bet might be to have them custom made.
let us know how it goes for future reference.

thwelcome31

[tbone1]

Understood. Just trying to stay away from having them custom made because of the cost.

[gnrphil]

Oh yeah I understand that, you might want to wait a few days before contacting Sea Pro as I believe they are busy with a dealer conference right now.

[freezerfiller]

Try RNR-marine.com

[medic9931]

Any luck with the enclosure I just bought a 2003. 2550wa and I am looking for a set as well.

[T-Topless]

We have the patterns for all Sea-Pro boats OEM canvas, but have archived them due to minimal sales and other projects. It takes quite a bit of time to determine what you have/need, but with winter coming on, we can make canvas for some boats (if we can locate the exact paper patterns and determine exactly which model the top was), so let us know what you need.

The 255WA Hard-Top is a challenge (especially the 2000 model), as Sea-Pro used at least 2 different Hard-Tops on it, and we don't have a way to tell which you have, so unfortunately we can't sell canvas for the 255WA any more.

OEM Tops: The factory original aluminum T-Top and Hard-Tops were made by EMC Towers (Columbia, SC). The factory original-equipment (OEM) canvas will ONLY fit these T-Tops and Hard-Tops. Boats originally sold (when new) by Chatlee Marine in NC were delivered to them without T-Tops and Chatlee had their own T-Top (std or deluxe model) installed by them, so only Chatlee can provide canvas for these boats. Boats originally sold by Ed's Marine Superstore in VA usually had Ed's T-Top on them as well. The factory original (Atlantic tag) canvas (T-Top, Spray-Shield or Gull-Wings) will NOT fit a Chatlee or Ed's T-Top!

Caveat: If you still have a tag with a part number on your Sea-Pro canvas (even a 255WA), we can make that piece and the pieces that go with it, since we'll have the part number. Again, we can only do this in the fall/winter when we have time to send someone into the attic for the patterns.

Center-Console: We generally have the OEM T-Top canvas/Spray-Shield/Gull-Wings(to gunwales) (180cc, 186cc, 190cc, 206cc, 235cc, 238cc, 255cc for example), some Mooring-Covers (190cc no T-Top for example) and some Console-Covers (no T-Top, SV1900 and SV2100 for example). We also have TTopCovers to cover you boat (below T-Top), Carver Over-T-Top covers, Trailerable Boat-Covers (no T-Top), Center-Console Storage-Curtains, Console-Covers, Leaning-Post-Covers, Flip-Flop Seat Covers, Motor Covers and our T-Topless folding T-Top (T-Topless.com).

Walk-Arounds: We generally have the OEM Top canvas (for soft top, 210wa Bimini/spray/side for example), Hard-Top front Spray-Shield/Side-Curtains/Aft-Curtains(some) (210wa for example) and a few Mooring-Covers (206wa no Hard-Top for example). We also have Carver Over-Hard-Top covers and Motor Covers.

Hope we can help!

See RNR-Marine.com/SeaPro.shtml (OEM canvas not listed any more, just Email us at [e-mail] and Sandy will look for your canvas)

[marksman66]

I am looking at a 2006 model 2100cc. Need input on quality and a fair price for this model moderately equipped. Help please

[Juan]

Oct 23, 2016 11:49:00 GMT -6 marksman66 said:

I am looking at a 2006 model 2100cc. Need input on quality and a fair price for this model moderately equipped. Help please

We'll need more info to give you any sort of an educated guess... engine make, size, hours, electronics, trailer, single or dual axle, accessories: trolling motor, T-top, etc. You can get a close guestimate using NADA for boats.