monjay
Sailor
Posts: 1
Sea Pro model and year: 2006 Sea Pro 238WA
|
Post by monjay on May 28, 2024 17:30:25 GMT -6
Hey all,
I know this is a shot in the dark... but I have pin pointed my fuel issue between the gas tank and the motor. Does anyone have a fuel flow diagram handy they can share? Maybe even wiring I can check since the bilge is such a pleasure to work in on these boats!
I got the motor running on an aux tank connected into the In port on the water separator on the motor, so I know the FMS is working properly.
I am thinking the issue might either be, a clogged line from the tank to the motor, or maybe no power/faulty fuel pump inside the tank. Any ideas or help would be great! This completely ruined the holiday weekend.
Thanks! Jason
|
|
|
Post by gnrphil on May 29, 2024 8:02:51 GMT -6
There is no fuel pump in the tank, you will have a pick up tube coming out of the tank with an anti siphon valve on top of that, from there the fuel line runs (or should) to the fuel water separator and then around to the starboard side of the splash well (inside) where there is a barb connector, other side (outside) of the splash well the fuel line runs to the outboard motor. Under the rear seat you will find a round access plate, in there you will find the fuel level sender and the pick up tube with the fuel line attached. I'd start at the anti siphon valve on top of the pick up tube and see if it has a blockage. Hope this makes sense.
|
|