|
|
Post by savannahslack on Jun 9, 2024 7:15:07 GMT -6
I’ve got a 2005 Sea Boss SV2100 and am looking for some type of liner for the rear hatches on the port and starboard sides that open into the bilge area. Id like to find or make a removable liner that sits down inside the hatch cover to use for storage but also keep items from just being down in the bilge area. Anyone seen or done anything like this?
|
|
|
|
Post by lifejacket on Sept 3, 2024 19:41:27 GMT -6
I don't have an example for you but am interested in your situation because I have a sea pro SV2100 and I think they are very similar. In my portside rear hatch it is finished and has a drain thru the transom. The drain is nice but it's a very small shallow compartment. I keep a small stern anchor in here but wouldn't mind cutting out the bottom of the finished compartment for more storage space. At some point I'm going to need to replace the thru hull for the deck drains which is currently inaccessible and I'll have to cut a hole and stick a pie plate there at the very least. Do you have a picture of your rear boxes?
|
|
