Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 20, 2014 14:15:49 GMT -6
Hello everyone:
Im new here, and I am needing the information that is included at the Maximun Capacity label for my Sea Pro 190CC 2002. (19ft.) Please help, thanks
XX Persons or XXXX lbs XXXX lbs Persons Gear XXX HP Motor Manufacturers City State Zipcode
I will really apprecciatte!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 20, 2014 14:39:56 GMT -6
I got it Thanks but, what is the max persons + gear?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 21, 2014 8:05:46 GMT -6
TKS Southern Cross. And thanks for the welcome, I will be here for a While and hope can be resource for others who also need it. I was doing a search last night and finally found it. Here it is for everybody: 8 Persons Max 1750 Max lbs with gear Max HP 150 Aslo found manufacturer's address SEA PRO / 182 SEA PRO DRIVE NEWBERRY SC 29108 I have heard the no longer exist, but it fills a blank space on the US Coast Guard Max Capacities Label Regards! Attachment Deleted
|
|
|
Post by seapro210 on Aug 4, 2015 7:47:54 GMT -6
I just called the number and got the run-around. The rep said that they have not been given any info on the Sea Pro boat parts and recommended that I look on the web. He did say that they do support the hull warranty for Sea Pro boats 05 through 08.
|
|
|
Post by palesce on Aug 18, 2015 7:23:53 GMT -6
I have a Sea Pro 2006, Model 206. Where I can find an installation drawing for the installation of the t-top?
|
|
|
Post by AHHHH-Spray on Aug 20, 2015 8:34:08 GMT -6
I have a Sea Pro 2006, Model 206. Where I can find an installation drawing for the installation of the t-top? Probably not anywhere. Are you trying to figure out how to install a t-top, or are you trying to figure how the one you have is installed? Let us know what you're trying to figure out and someone may have the answer.
|
|
|
Post by lmoore59 on Jun 25, 2016 11:32:10 GMT -6
I am in need of some information. I have a sea pro 170cc there is some trash in fuel filter and i need to change it,but I think i also need to drain fuel from gas tank. I have no idea how to approach the job. HELP!
|
|
|
Post by Juan on Jun 25, 2016 13:32:19 GMT -6
I am in need of some information. I have a sea pro 170cc there is some trash in fuel filter and i need to change it,but I think i also need to drain fuel from gas tank. I have no idea how to approach the job. HELP! Have you installed a new fuel filter and get trash in the new one? Unless there's a lot of trash and water in the fuel filter, you may not need to drain the fuel tank. If you haven't done so already, I'd just replace the fuel filter and then if it continues to pick up water and trash, drain the tank. If you decide to do that, you can disconnect the fuel line from the motor and then pump the fuel into a container by pumping the primer ball until no more fuel will come out. There will be fuel remaining in the fuel tank since the fuel pick up tube doesn't sit on the bottom of the tank, so to get the tank completely dry, you'll have to remove the fuel gauge sending unit that's located on the top of the tank and then stick a towel or something into the opening to soak up the remaining fuel. There should be a circular access port on the deck directly over the fuel sending unit.
|
|
|
Post by monkey on Nov 18, 2018 9:07:09 GMT -6
Trying to find out hull thickness on 2001 190cc
|
|