rdn
Sailor
Posts: 5
|
Post by rdn on Jun 6, 2022 15:25:17 GMT -6
Has anyone had issues with the live well back draining through scuppers into boat?
|
|
|
Post by Juan on Jun 6, 2022 16:04:39 GMT -6
Do you mean your live well is filling and over flowing onto the deck?
|
|
rdn
Sailor
Posts: 5
|
Post by rdn on Jun 6, 2022 18:35:02 GMT -6
No,when the boat is at still or idle speed the overflow does not drain out but comes into the boat from the scupper. The boat is currently being taken back to the factory.
|
|
|
Post by gnrphil on Jun 7, 2022 7:13:17 GMT -6
Sounds like it was plumed wrong or something with the manifold drain system, please keep us posted as to the outcome.
|
|
|
Post by gnrphil on Jun 7, 2022 7:24:19 GMT -6
|
|
rdn
Sailor
Posts: 5
|
Post by rdn on Jun 7, 2022 7:56:50 GMT -6
I am hoping they reroute the scupper drains to their own independent drains out the back of boat. If there was ever an issue with having to shut main valve off at manifold and boat was taking on too much water from rain or sea water the boat won’t drain through scuppers.
|
|
|
Post by gnrphil on Jun 7, 2022 12:18:23 GMT -6
I am hoping they reroute the scupper drains to their own independent drains out the back of boat. If there was ever an issue with having to shut main valve off at manifold and boat was taking on too much water from rain or sea water the boat won’t drain through scuppers. You make a good point, shut that valve off and nothing will drain.
|
|
rdn
Sailor
Posts: 5
|
Post by rdn on Jun 12, 2022 3:20:36 GMT -6
Issue resolved, Sea Pro did reroute the scuppers independently through the transom to my satisfaction. Thanks to the folks at Cove 2 Coast in Richmond Hill, Ga and Sea Pro for the quick response and turn around.
|
|
jtp
Sailor
Posts: 2
|
Post by jtp on Jul 17, 2023 10:58:03 GMT -6
What is the proper position for the drain manifold valve lever when the boat is in the water? Should it be open i.e. vertical, or closed i.e. horizontal?
|
|
|
Post by Brandon on Sept 18, 2023 20:11:17 GMT -6
Did Sea Pro reroute the scuppers independently as a fix going forward?
|
|