|
Post by gnrphil on Oct 12, 2016 22:01:21 GMT -6
Mine will go up on the top like this, these were already there when I got the boat.
|
|
|
Post by gtightline on Oct 13, 2016 4:55:10 GMT -6
If I had a T-Top it would make things easier, that's for sure. That is nice Phil, plug and play, you might say...hahalol
|
|
|
Post by Juan on Oct 13, 2016 5:38:15 GMT -6
The bow rails on my boat also restrict where I can mount the outriggers but there's a small space just in front of the bow rails and behind the forward rod lockers that should be the perfect place. I'd really rather mount them somewhere on the T-top. I'll know more if they ever get here.
|
|
|
Post by gtightline on Oct 13, 2016 6:38:53 GMT -6
This is the best I have been able to come up with as far as mounting instructions. If anybody can find something specific to the Tigress Outriggers please post. I sent an e-mail to Tigress and have still not received a reply. These instructions are for Seachoice, I think they are pretty similar. www.seachoice.com/pdf/88111_%20OUTRIGGER%20KIT.pdf
|
|
|
Post by gnrphil on Oct 13, 2016 11:18:14 GMT -6
Juan do you have a pic of the underside of your top, some come with an outrigger plate installed.
|
|
|
Post by gnrphil on Oct 13, 2016 14:51:15 GMT -6
Just received an E mail that I will be receiving the mounts and rigging kit emthup
|
|
|
Post by Juan on Oct 13, 2016 17:31:09 GMT -6
Juan do you have a pic of the underside of your top, some come with an outrigger plate installed. I can't access Photobucket for some reason but I think I have a photo somewhere.. There's not any outrigger plates per se, but there are plates on the underside that are there for mounting antennas. I'll have to wait to see what the mounts look like before I'll know if I can use the antenna plates as a mounting location. They may not be large enough. I'd feel better if I got an email telling me that I'll be receiving the mounts and rigging.. It's listed as "In Process" on my West Marine account but I haven't heard a word otherwise.
|
|
|
Post by gnrphil on Oct 13, 2016 20:08:31 GMT -6
I spoke with customer service today and they said they are shipping mine today, she sounded a little offended when I asked her to send me an E Mail confirming that LOL.
|
|
|
Post by Juan on Oct 14, 2016 4:44:47 GMT -6
Got an email during the night stating that mine will be delivered today. Keeping my fingers crossed at this point.
|
|
|
Post by Juan on Oct 14, 2016 16:29:45 GMT -6
Got an email during the night stating that mine will be delivered today. Keeping my fingers crossed at this point. The email was a lie.. they didn't show up ...but UPS did deliver a box of new trout lures I ordered so it's not all bad.
|
|
|
Post by gtightline on Oct 15, 2016 6:58:58 GMT -6
Wow, this thread has gotten a lot of posts.
|
|
|
Post by korrupt3dazn on Oct 15, 2016 9:37:02 GMT -6
Check out what the Post Man dropped off :-)
|
|
|
Post by gnrphil on Oct 15, 2016 12:03:37 GMT -6
Check out what the Post Man dropped off :-) Pics no workey
|
|
|
Post by gtightline on Oct 15, 2016 13:23:57 GMT -6
We all got one heck of a good deal...$35.00...can't beat it with a stick..hahaha
|
|
|
Post by korrupt3dazn on Oct 15, 2016 13:28:46 GMT -6
Fixed it...I think haha.
|
|
|
Post by Juan on Oct 15, 2016 14:54:01 GMT -6
We all got one heck of a good deal...$35.00...can't beat it with a stick..hahaha You didn't have to pay shipping?
|
|
|
Post by Juan on Oct 15, 2016 17:20:38 GMT -6
Juan do you have a pic of the underside of your top, some come with an outrigger plate installed. You can see the antenna plates on the underside of the canvas... I'm thinking they won't be large enough to mount the outrigger mounts to.
|
|
|
Post by gnrphil on Oct 15, 2016 17:32:54 GMT -6
I don't think that will work either, on mine there's two plates running front to back beside the E box.
|
|
|
Post by korrupt3dazn on Oct 17, 2016 11:16:48 GMT -6
Just installed these bad boys. Sucks it doesn't come with the screws to actually mount them
|
|
|
Post by gtightline on Oct 18, 2016 5:32:29 GMT -6
We all got one heck of a good deal...$35.00...can't beat it with a stick..hahaha You didn't have to pay shipping? Yes I paid $5.00 for shipping on the poles, but the rest of the parts that were sent were free.
|
|